Stratasys J750 User Manual page 48

Stratasys J750 User Guide
Figure 4-28 Selecting Maintenance Counters
If there is a maintenance task due, this is indicated on the main interface
screen.
Figure 4-29 Maintenance Required indicator
If this indicator appears, you can display the Maintenance Counters screen by
clicking on it.
The Maintenance Required indicator appears by default for most operator-
performed maintenance tasks. The check box under "User Warning" controls
whether or not it appears when a particular task is due.
DOC-08040 Rev. E
4 Operating and Maintaining the Stratasys J750 3D Printer
4-27