Stratasys J750 User Manual page 37

Stratasys J750 User Guide
Changing Model Materials Without Flushing
You can change the Model materials without flushing. Use this option when
the color or mechanical properties of the printed model are unimportant.
To change Model materials without flushing:
1. In the Material Replacement Options screen, click Advanced Settings.
2. In the Advanced Settings screen, select Manual slot selection and click
3. When the Material Replacement Options screen opens, select the Replace
DOC-08040 Rev. E
Apply.
Figure 4-14 Manual slot selection
materials without flushing check box and click Next.
Figure 4-15 Replace materials without flushing
4 Operating and Maintaining the Stratasys J750 3D Printer
4-16