Stratasys J750 User Manual page 83

Stratasys J750 User Guide
22. I n the Replace print heads screen, select the check box to confirm that
23. W ith your fingers, make sure that the new head is level and even with the
24. C onfirm that the heads are level by selecting the check box in the
DOC-08040 Rev. E
you have replaced the head(s), and click Next.
Figure 4-90 Head replacement confirmation
other heads.
Figure 4-91 Checking the level of the new head
following wizard screen, and click Next.
Figure 4-92 Installation-check screen
4 Operating and Maintaining the Stratasys J750 3D Printer
4-62