Stratasys J750 User Manual page 8

Stratasys J750 User Guide
Terms Used in This Guide
Build tray
Cleaning fluid
Client/user workstation
Connex™
Digital Material
Digital Material Mode
GrabCAD Print
Mixed part
Mixed tray
Model material
Printer computer
Printer interface
Printer software,
printer-control
application
Resin
STL
Support material
DOC-08040 Rev. E
In the print preparation application: The surface displayed on
the screen that represents the actual build tray in the printer.
In the printer: The surface upon which models are produced.
Cleanser for flushing material feed tubes and the printing block,
used to completely remove Model and Support material from
the system before loading another type of material in the
printer and before long-term shutdown. The cleaning fluid is
supplied in material cartridges.
The workstation on which s oftware is installed for preparing
build trays for production on PolyJet printers. (There is no limit
to the number of client workstations.)
The technology of printing models by jetting multiple materials
simultaneously from the print heads. This technology enables
J750 printers to print in Digital Material mode.
Combinations of model materials fabricated in the printer from
the basic model materials installed.
The printer mode used to print a job using two or more
different model materials. (This mode can also be used to
eliminate the need for performing the Material Replacement
procedure when printing with a single model material.)
A software application for preparing print jobs on a variety of
3D printers, including the Stratasys J750 printer.
Models whose parts are printed using more than one model
material.
A build tray containing objects, each of which is designed to be
printed using a different model material.
Material used for building models.
The computer inside the J750 printer that operates it.
The GUI (graphical user interface) used for controlling the
J750 printer.
Software running on the computer inside the J750 printer, that
controls all printer operations.
The base substance from which photopolymer printing
materials are made for use in Stratasys PolyJet printers.
A file used for printing 3D models.
Material used for supporting the structure of models during
production.
1 About This Guide
1-3