Stratasys J750 User Guide
4. Choose the configuration for producing models:
DOC-08040 Rev. E
❒ 6 materials
❒ 3 materials
Figure 4-9 Material Replacement Options
6 Materials
Each of the three Model print heads is loaded with two different
materials.
Figure 4-10 Six materials loaded in the print heads
❒ Once the materials are loaded, you can print with any single material,
or with a combination of them. High-speed printing is not available,
but high-quality models can be printed.
4 Operating and Maintaining the Stratasys J750 3D Printer
4-12