Drive Model Numbers; Drive Enclosure And Revision Code; Drive Model Number Structure; Spec Number Structure - YASKAWA P7 User Manual

!

Drive Model Numbers

The model number on the nameplate indicates the design specification, voltage, and rating of the Drive in alphanumeric codes.
!

Drive Enclosure and Revision Code

The Drive SPEC number on the nameplate indicates the voltage, Drive rating, enclosure type, and the revision code of the
Drive in alphanumeric codes.
No.
2
4
Open Chassis Type (IEC IP00)
Protected so that parts of the human body cannot reach electrically charged parts from the front when the
Drive is mounted in a control panel, also called (protected chassis).
TERMS
NEMA Type 1 (IEC IP20)
The Drive is shielded from the exterior, and can thus be mounted to the interior wall of a building
(not necessarily enclosed in a control panel). The protective structure conforms to the standards of NEMA
Type 1 in the USA. All protective covers (Fig 1.4) must be installed to conform with IEC IP20 and NEMA Type
1 requirements.
AC Drive
P7 Family
No. Spec
U
UL Specification
No. Voltage
2
3-phase, 208-240Vac
4
3-phase, 480Vac
Fig 1.2 Drive Model Number Structure
2 011 1 A
Voltage
3-phase, 208 - 240Vac
3-phase, 480Vac
Rating
Fig 1.3 SPEC Number Structure
Physical Installation 1 - 4
CIMR – P7 U 2 0 11
Rating
Hardware Revision
No.
0
1
Enclosure Type
Open chassis (IEC IP00)
NEMA Type 1 (IEC IP20)