Installing Gsdml; Connecting The Inverter To Profibus - Siemens SINAMICS G120 Operating Instructions Manual

Installing
4.5 Connecting the interfaces for the inverter control
Application examples
You can find application examples for PROFINET communication on the Internet:
Controlling the speed of a SINAMICS G110M/G120/G120C/G120D with S7-300/400F via
PROFINET, with Safety Integrated (via terminal) and HMI
support.industry.siemens.com/cs/ww/en/view/60441457)
Controlling the speed of a SINAMICS G110M/G120 (Startdrive) with S7-1500 (TO) via
PROFINET, with Safety Integrated (via terminal) and HMI
support.industry.siemens.com/cs/ww/en/view/78788716)
4.5.10.4

Installing GSDML

Procedure
To install the GSDML of the inverter in the engineering system of the controller, proceed as
follows:
1. Save the GSDML to your PC .
– From the Internet: GSDML
– From your inverter:
2. Unzip the GSDML file on your computer.
3. Import the GSDML into the engineering system of the controller.
You have now installed the GSDML in the engineering system of the controller.
4.5.11

Connecting the inverter to PROFIBUS

140
26641490)
Insert a memory card into the inverter.
Set p0804 = 12.
The inverter writes the GSDML as zipped file (*.zip) into directory /SIEMENS/SINAMICS/
DATA/CFG on the memory card.
(https://support.industry.siemens.com/cs/ww/en/view/
Operating Instructions, 09/2017, FW V4.7 SP9, A5E34257946B AE
(https://
(https://
Converter with the CU230P-2 Control Units