Installing Gsdml; Connecting The Converter To Profibus - Siemens SINAMICS G120C Operating Instructions Manual

Installing
4.10 Connecting the interfaces for the converter control
Telegram
Set the same telegram in the converter as in the IO Controller. Interconnect the telegrams in the
control program of the IO Controller with the signals of your choosing.
Application examples
You can find application examples for PROFINET communication on the Internet:
via PROFINET or PROFIBUS, with Safety Integrated (via terminal) and HMI
support.industry.siemens.com/cs/ww/en/view/60441457)
(TO) via PROFINET or PROFIBUS, with Safety Integrated (via terminal) and HMI
support.industry.siemens.com/cs/ww/en/view/78788716)
4.10.10.4

Installing GSDML

Procedure
1. Save the GSDML to your PC.
– With Internet access:
– Without Internet access:
2. Unzip the GSDML file on your computer.
3. Import the GSDML into the engineering system of the controller.
You have now installed the GSDML in the engineering system of the controller.
4.10.11

Connecting the converter to PROFIBUS

112
Drive control via PROFIBUS or PROFINET (Page 211)
Controlling the speed of a SINAMICS G110M/G120/G120C/G120D with S7-300/400F
Controlling the speed of a SINAMICS G110M / G120 (Startdrive) with S7-1500
GSDML (https://support.industry.siemens.com/cs/ww/en/view/26641490)
Insert a memory card into the converter.
Set p0804 = 12.
The converter writes the GSDML as a zipped file (*.zip) into directory /SIEMENS/SINAMICS/
DATA/CFG on the memory card.
Operating Instructions, 02/2023, FW V4.7 SP14, A5E34263257B AK
(https://
(https://
SINAMICS G120C Converters