Appendix; New And Extended Functions; Firmware Version 4.7 Sp9 - Siemens SINAMICS G120 Operating Instructions Manual

Appendix

A.1

New and extended functions

A.1.1

Firmware version 4.7 SP9

Table A-1 New functions and function changes in firmware 4.7 SP9
Function
1 Support of PM240‑2 FSG Power Modules
2 Support of PM240‑2 Power Modules in push-through technology, frame
sizes FSD ... FSF, for the following voltages:
● 3 AC 200 V ... 240 V
● 3 AC 380 V ... 480 V
● 3 AC 500 V ... 690 V
3 Support of PM240‑2 Power Modules, 3 AC 500 V ... 690 V, frame size FSD
with reduced power 3 kW ... 7.5 kW
4 Shortened switch-on time for PM330 Power Modules
5 Expansion of the support for 1FP1 synchronous-reluctance motor with the
following inverters:
● SINAMICS G110M
● SINAMICS G120D
● SINAMICS G120 with CU240B‑2 or CU240E‑2 Control Unit
A PM240‑2 Power Module is required to operate a 1FP1 synchronous-re‐
luctance motor with SINAMICS G120
6 Support of 1FP3 synchronous-reluctance motors
A PM240‑2 Power Module is required to operate a 1FP3 synchronous-re‐
luctance motor along with a selective release from SIEMENS
7 Support of 1LE5 induction motors
8 The inverter supports forming the PM330 Power Module DC link capacitors
Converter with the CU230P-2 Control Units
Operating Instructions, 09/2017, FW V4.7 SP9, A5E34257946B AE
SINAMICS
G120
- - ✓ ✓ ✓ ✓
- - ✓ ✓ ✓ ✓
- - ✓ ✓ ✓ ✓
- - ✓ - - -
✓ - ✓ ✓ ✓ -
- - ✓ - - -
- ✓ ✓ ✓ ✓ ✓
- - ✓ - - -
A
G120D
- - -
- - -
- - -
- - -
✓ - -
- - -
- - -
- - -
515