Siemens SINAMICS G120 Operating Instructions Manual page 372

Saving the settings and series commissioning
7.1 Backing up and transferring settings using a memory card
Manually backing up
Requirements
● The inverter power supply has been switched on.
● No memory card is inserted in the inverter.
Procedure with STARTER
Proceed as follows to back up your settings on a memory card:
1. Go online.
2. Press the "Copy RAM to ROM" button
3. In your drive, select "Drive Navigator".
4. Select the "Commissioning" button.
5. Select the button to transfer the settings to the memory card.
6. Select the settings as shown in the diagram and start the data backup.
7. Wait until STARTER signals that the data backup has been completed.
8. Close the screen forms.
372
.
Converter with the CU230P-2 Control Units
Operating Instructions, 09/2017, FW V4.7 SP9, A5E34257946B AE