Output Reactor - Siemens SINAMICS G120 Operating Instructions Manual

Description
3.5 Components for the Power Modules
3.5.4

Output reactor

Output reactors reduce the voltage stress on the motor windings and
the load placed on the inverter as a result of capacitive recharging
currents in the cables.
An output reactor is required for the following motor cable lengths:
● For PM330 Power Module:
– ≥ 100 m shielded
– ≥ 200 m unshielded
● All other Power Modules:
– ≥ 50 m shielded
– ≥ 100 m unshielded
The figure on the right-hand side shows as example the output reactors
for PM240-2 Power Modules, FSB and FSC.
NOTICE
The output reactor is damaged if the inverter pulse frequency is too high
The output reactors are designed for a specific pulse frequency. The output reactor can
overheat if the inverter is operated with excessive pulse frequencies. Excessively high
temperatures damage the output reactor.
● Operate the inverter only with an output reactor with the permissible pulse frequencies:
Output reactors for PM230 Power Modules (IP55/UL Type 12)
Power Module
FSA
FSB
FSC
FSD
FSE
46
– PM330 Power Modules HX and JX: Pulse frequency ≤ 2.5 kHz
– All other Power Modules: Pulse frequency ≤ 4 kHz
6SL3223-0DE13‑7 . A0,
6SL3223-0DE15‑5 . A0,
6SL3223-0DE17‑5 . A0,
6SL3223-0DE21‑1 . A0,
6SL3223-0DE21‑5 . A0,
6SL3223-0DE22‑2 . A0
6SL3223-0DE23‑0 . A0
6SL3223-0DE24‑0 . A0,
6SL3223-0DE25‑5 . A0,
6SL3223-0DE27‑5 . A0,
6SL3223-0DE31‑1 . A0,
6SL3223-0DE31‑5 . A0,
6SL3223-0DE31‑8 . A0
6SL3223-0DE32‑2 . A0
6SL3223-0DE33‑0 . A0
6SL3223-0DE33‑7 . A0
6SL3223-0DE34‑5 . A0
Power
0.37 kW ... 2.2 kW
3.0 kW
4.0 kW ... 7.5 kW
11.0 kW ... 18.5 kW
22 kW
30 kW
37 kW
45 kW
Converter with the CU230P-2 Control Units
Operating Instructions, 09/2017, FW V4.7 SP9, A5E34257946B AE
Output reactor
6SL3202-0AE16-1CA0
6SL3202-0AE18-8CA0
6SL3202-0AE21-8CA0
6SL3202-0AE23-8CA0
6SE6400-3TC03-8DD0
6SE6400-3TC05-4DD0
6SE6400-3TC08-0ED0
6SE6400-3TC07-5ED0