Appendix
A.3 The device trace in STARTER
A.3
The device trace in STARTER
Description
The device trace graphically displays inverter signals with respect to time.
Signals
In two settings that are independent of one another, using
each.
Recording
You can start a measurement as frequently as you require. As long as you do not exit START,
the results remain under the "Measurements" tab with data and time. When terminating
STARTER or under the "Measurements" tab, you can save the measurement results in the
*.trc format.
530
you can interconnect eight signals
Converter with the CU230P-2 Control Units
Operating Instructions, 09/2017, FW V4.7 SP9, A5E34257946B AE