Connecting The Inverter With The Pm240P-2 Power Module - Siemens SINAMICS G120 Operating Instructions Manual

4.4.8

Connecting the inverter with the PM240P-2 Power Module

Figure 4-20 PM240P-2 Power Module connection overview
Table 4-28 Connection, cross-section and tightening torque for PM240P-2 Power Modules
Inverters
FSD Line supply,
motor
FSE
FSF Line supply,
motor
Connections, frame sizes FSD ... FSF
You must remove the covers from the connections in order to connect the line supply and
motor cables to the inverter.
Figure 4-21
Converter with the CU230P-2 Control Units
Operating Instructions, 09/2017, FW V4.7 SP9, A5E34257946B AE
Connection
Screw-type termi‐ 10 ... 35 mm
nal
25 ... 70 mm
35 ... 2 × 120 mm
22 ... 25 Nm
Cable lug accord‐
ing to SN71322
Remove the connection covers
4.4 Connecting the line supply and motor
Cross-section, tightening torque
Metric
, 2.5 ... 4.5 Nm 20 ... 10 AWG, 22 lbf in
2
8 ... 2 AWG, 40 lbf in
, 8 ... 10 Nm 6 ... 3/0 AWG, 88.5 lbf in
2
, 1 ... 2 × 4/0 AWG, 210 lbf in --
2
Installing
Stripped
insulation
Imperial
length
18 mm
25 mm
97