Dimension Drawings, Drilling Dimensions For The Pm230 Power Module, Ip20 - Siemens SINAMICS G120 Operating Instructions Manual

Installing
4.3 Installing Power Modules
4.3.3

Dimension drawings, drilling dimensions for the PM230 Power Module, IP20

The following dimension drawings and drilling patterns are not to scale.
Frame sizes FSA ... FSC
Table 4-5
Frame
size
FSA
FSB
FSC
BOP-2, IOP-2 or blanking cover
1)
Power Module depth without Control Unit: 165 mm
2)
Table 4-6
Frame size
FSA
FSB
FSC
You can mount the Power Modules without any lateral cooling air clearance. For tolerance reasons,
1)
we recommend a lateral clearance of approx. 1 mm.
68
Dimensions depend on the operator panel (OP) that is inserted
Width Height [mm]
[mm]
without shield
plate
73 196
100 292
140 355
Drilling dimensions, cooling clearances and fixing
Drilling dimensions [mm] Cooling air clearances [mm]
b h
62.3 186
80 281
120 343
Mounting depth in the cabinet with
with shield plate without OP
276
370
432
c Top Bottom
6 80 100
6 80 100
6 80 100
Converter with the CU230P-2 Control Units
Operating Instructions, 09/2017, FW V4.7 SP9, A5E34257946B AE
Control Unit (CU) [mm]
2)
with OP
224 235
224 235
224 235
Fixing/torque
1)
[Nm]
Front
--- 2 x M4 / 2.5
--- 4 x M4 / 2.5
--- 4 x M5 / 3.0
1)