Chapter 12 Managing Snmp; Using Snmp Commands; Viewing The System Group Information - Avaya M770 User Manual

Chapter 12
Managing SNMP
This chapter describes how to use the command-line interface to manage SNMP in
the Avaya M770 ATM Switch. For information about how to access and use the
Avaya M770 ATM Switch command-line interface, see "Chapter 3", "How to Use
the Command-line Interface".
Note: The secure commands do not affect Telnet sessions access to a M770 ATM
Switch. Telnet sessions use password security.

Using SNMP Commands

These commands configure SNMP information on an Avaya M770 ATM Switch.

Viewing the system group information

To display the information for the system group (sys), use the snmp show
command.
Command:
Output:
Avaya M770 ATM Switch User's Guide
M15-155s8:/>snmp show
SNMP System Group Information
-----------------------------
SysDescr : Avaya M770 ATM Switch, Software Version 1.0.17
SysObjectID : 1.3.6.1.4.1.81.17.1.16
SysContact : keren
SysName : oz 77
SysLocation : akko
SysUpTime (HH:MM:SS) : 1 day, 19:53:13
171