terminal length
User level: read-only, read-write, admin.
Use the terminal length command to set the length of the terminal display in
lines.
The syntax for this command is:
terminal length [<screen-length>]
screen-length
Example:
C460-1> terminal length
terminal length: 25 (auto-detected)
C460-1> terminal length 40
C460-1> terminal length
C460-1> terminal width: 40 (user-configured)
terminal width
User level: read-only, read-write, admin.
Use the terminal width command to set the width of the terminal display in
characters.
The syntax for this command is:
terminal width [<characters>]
characters
Example:
C460-1> terminal width
terminal width 80 (auto-detected)
C460-1> terminal width 60
C460-1> terminal width
terminal width 60 (user-configured)
timers basic
User level: privileged, supervisor.
Avaya C460 Reference Guide
• Blank (no value) – display the current length of the screen.
• Number – set the screen length
• Blank (no value) – display the current width of the screen.
• Number – set the screen width
Chapter 2
Avaya C460 CLI Commands
225