Polycom RSS 4000 User Manual page 79

Virtual Recording Room (VRR)
Polycom, Inc.
Parameter Description
Enable Multipoint Specify whether to enable multipoint VRR.
VRR
You can select one of the layout:
•
•
Enable Specify whether to pre-create a live streaming link.
Predetermined VRR
If selected, specify the Scheduled time of the meeting. Specify
also the following settings:
Permanent Reservation: Specify whether the VRR is
available permanently, even if no device calls in.
Idle Time to Live: Specify an idle time in range of 5-120
minutes. The VRR is removed from the system automatically
in the following scenarios.
There is no device dial into the VRR for the time set here after
the Scheduled time arrives.
The device disconnected from the VRR for the time set here.
For more information, see
Enable External Specify whether to support external media servers. When
Media Servers select this option, you can:
•
•
Note: You need to configure external servers from External
Servers > Media servers first. For more information, see
configure external media servers:
Click OK.
7
• Once a VRR is created, the VRR owner is automatically added to the allowed list
and authorized to view and edit.
• Administrators are not limited by the allowed list, and have always permissions to
view and edit VRR recorded files or live streaming.
Lecture Mode: Displays the lecture in the full screen.
When a participant keeps speaking for 10 seconds, the
system elects him or her as a lecturer. The lecturer switches
between the two sites through the audio activation.
CP Mode: Displays the video of two sites side by side on
the screen.
For more information, see
page 73.
Predetermined VRR
Select one or more media servers to which you can live
stream meetings.
Select one or more FTP servers to which you can transfer
meeting recordings and view these recordings on demand
later.
Using the RSS 4000 Admin UI
Multipoint Recording on
on page 72.
on page 77
To
71