Recording Settings - Polycom RSS 4000 User Manual

System Configuration

Recording Settings

Polycom, Inc.
Date
Time
NTP servers 1 and
NTP server 2
3 Click Update. The system restarts to apply your changes.
You can configure supplementary recording settings here.
To configure recording setting options:
1 Go to System Config > Recording Settings.
Configure the following settings:
2
Parameter Description
Continue If this option is selected, when there are insufficient resources
recording if no available to live stream a meeting, the system records the meeting
resource for live to the hard disk automatically. You cannot continue viewing the
streaming video in real time through the web. However, you can play back
the video upon the completion of recording and format
conversion.
If this option is not selected, when there are no live streaming
resources, the system rejects all calls that have live streaming
enabled.
Enable 1080p Specify whether to enable the 1080p capability of the system for
recording with live recording with live streaming.
streaming
If this option is selected, the system records in 1080p mode. Users
can view recorded meeting archives in 1080p from the TV UI.
However, streaming is limited to 720p or lower.
Enable Recording Specify whether to play the recording tone every 10 seconds
Tone during a recording.
This is to notify the participants of the ongoing recording.
The current system date and time.
Changing the time manually is not recommended.
Specify the address or domain name of a network time
server. NTP server 2 is used only when NTP server 1 is not
available.
Note: If you set a domain name, make sure you have already
set a DNS server address that can resolve this domain name
in System Config > IP Settings.
Using the RSS 4000 Admin UI
23