Start Recording Using The Tv User Interface - Polycom RSS 4000 User Manual

Polycom RSS 4000 System User Guide

Start Recording Using the TV User Interface

102
When in the -
video playing
-
state
-
When in the -
inputting state
-
You can use the up/down arrow buttons of the remote control to select Start
Recording, then press the right arrow button to enter the Recording menu
page.
You can choose to start recording directly or set a PIN code for recording. If
you set a PIN code for the video to be recorded, you must input the correct PIN
code to play back the video.
Start Recording Using the TV User Interface
*1 Pause the current video.
*2 Resumes a paused video.
*3 Stops playback of the current video
and returns to the main menu.
*4 Reverses the current video. Reverse
will stop at the previous I-frame. The
web UI can be used to set the interval
between I-frames. The Polycom RSS
4000 system has a default interval
between I-frames of one minute; the
interval can be set as 1-10 minutes.
*6 Fast forwards the current video. Fast
forward will stop at the next I-frame.
The web UI can be used to set the
interval between I-frames. The
Polycom RSS 4000 system has a
default interval between I-frames of
one minute; the interval can be set
from 1-10 minutes.
0-9 Quickly jumps through video
playback, from 0% to 90% play time
positions); after jumping, the video
will start to play from the nearest
I-frame. For example, the DTMF tone
7 will jump 70% of the way through
the video file.
0-9 Input numbers.
? Confirm the input.
- Delete the character before the cursor.
Polycom, Inc.