Backing Up Image Data - Polycom RSS 4000 User Manual

System Administration
Polycom, Inc.
User Name
Password
Enable SSL
Click Update. The system restarts to apply your changes.
4
When the Polycom RSS 4000 system is connected to the FTP server,
Backup/Restore Status on the page displays Connected.

Backing up Image Data

You can back up image data to an FTP server in two ways: automatic periodic
backup and immediate manual backup.
To automatically back up image data:
Go to Admin > Data Backup/Restore.
1
Select Enable Data Backup/Restore.
2
3 In the Image backup configuration area, specify where to save the
backup data in the text field beside Default Image Backup Path.
If the default backup path is not set, the system creates a folder for the
storage of files under the home directory of the FTP server.
Select Enable automatic image backup.
4
5 Configure the following settings:
Parameter
Frequency
Start Time
6 Click Update. The system restarts to apply your changes.
To manually back up the user data:
Go to Admin > Data Backup/Restore.
1
Enter the account and password for login to the FTP server. If
the FTP server has anonymous logins enabled, you can click
Use Anonymous to log in using anonymous account.
Note: The registered FTP user should possess read-write
permissions to user root directory.
Set whether to enable SSL encryption for the communication
between the Polycom RSS 4000 system and FTP server. The
system can only support implicit SSL FTP.
Description
Select the period for automatic backup, measured in day.
Select the start time of backup.
Using the RSS 4000 Admin UI
49