Product Activation - Polycom RSS 4000 User Manual

System Administration

Product Activation

Polycom, Inc.
5 Upon the completion of the upload, the system restarts to apply changes.
This may take several minutes.
After reboot, delete all temporary, delete all temporary IE files, close and
6
restart Internet Explorer.
7 Enter your administrator User ID and Password and then click Log In.
To confirm that the system is downgraded, check the software version on
the Product Activation page.
After the downgrade, you need to activate the system using an activation
key corresponding to the downgrade pack version. Different software
down grade pack versions may require different activation keys.
• You can downgrade your system from 8.5 to 8.0 or 8.5 to 7.0 directly.
• You can download the downgrade packages from support.polycom.com.
Documents and Downloads > UC Infrastructure > Polycom® RSS™ 4000.
After you installed or upgraded your Polycom RSS 4000 system, you need to
activate the system. Before you start, you need to obtain the product activation
code first.
For more information, see
To view the system activation status:
>> Go to Admin > Product Activation. Below system information are
displayed:
Parameter
Hardware Version
Software Version
Serial Number
Activation Status
Max Recording Ports
Max Live Streaming
Ports
Obtaining the Product Activation Key
Description
The current hardware version of the system.
The current version of the software running on the system.
Specify the product serial number of the system.
Indicates whether the system is activated. After the system is
successfully activated,
displays.
The maximum number of recordings ports supported by the
system.
The maximum number of live streaming ports supported by
the system.
Using the RSS 4000 Admin UI
on page 4.
displays, and otherwise
53