Introduction To Main Menu Page - Polycom RSS 4000 User Manual

Polycom RSS 4000 System User Guide

Introduction to Main Menu Page

100
In addition to the Admin UI, the Polycom RSS 4000 system also provides a TV
user interface for end users to perform the most commonly used operations
using the remote control. The TV user interface appears after an endpoint dials
the Polycom RSS 4000 system and sets up a connection successfully.
You can also show the menu by pressing the remote control.
To display the TV user interface in a multipoint recording:
>> Press the Left button, or DTMF key 4.
To hide the TV user interface in a multipoint recording:
>> Press the Zoom out button, or DTMF key 9.
After the endpoint sets up connection with the Polycom RSS 4000 system, it
enters the TV user interface menu page, where common recording and
playback options are provided, as shown below.
If the Recording Immediately function has been enabled in the VRR used by
the endpoint for dialing, the endpoint enters Recording page directly. When
the recording is stopped or cancelled, the endpoint returns back to the main
menu page.You can control the Polycom RSS 4000 system using the FECC and
DTMF functions of the remote control. When your endpoint supports FECC or
DTMF, use the remote control to operate the TV user interface menu page. You
need to press the far end button on the endpoint's remote control to access the
TV user interface.
Introduction to Main Menu Page
Polycom, Inc.