System Initial Configuration; Before You Start; Obtaining Network Information; Obtaining The Product Activation Key - Polycom RSS 4000 User Manual

Polycom RSS 4000 System User Guide

System Initial Configuration

Before You Start

4
You can now configure your RSS 4000 system to your local network by
changing its IP settings. When the RSS 4000 system is in your local network,
you can access its Viewer Portal and Administration User Interface (Thereafter
referred to as Admin UI) from any computer within this network.
There are two ways to change the initial IP settings:
• Use the Admin UI (recommended)
• Use a hyperterminal application, or Telnet connection
The system's default IP settings of the LAN1 port are as the following:
• IP Address: 192.168.1.254
• Subnet Mask: 255.255.255.0
• Gateway: 192.168.1.1

Obtaining Network Information

Before the initial configuration, get the following information from your
network administrator to configure the Polycom RSS 4000 system to your local
network:
• The IP address, subnet mask, and default gateway IP address you want to
assign to the Polycom RSS 4000 LAN ports.
• (Optional) Your DNS server address.
Your RSS 4000 system is shipped with the default DNS server addresses
208.67.222.222 and 208.67.220.220 pre-configured.
• (Optional) The gatekeeper address, H.323 prefix, E.164 number, and SIP
server address to be assigned to the Polycom RSS 4000 system.

Obtaining the Product Activation Key

Before using the Polycom® RSS™ 4000 system, you need a product activation
key to activate the system.
System Initial Configuration
Polycom, Inc.