Polycom RSS 4000 User Manual page 134

Polycom RSS 4000 System User Guide
126
Parameter
Application Name
6 When Video on Demand is enabled, configure the following settings to
transfer generated recordings to the Wowza server content directory:
Parameter
FTP IP
FTP Port
User Name
Password
Default Path
Enable SSL
7 Click OK.
You cannot create two external servers with the same Server type, IP, Port, Application
Name, and Publishing Point Name. This is because the Polycom RSS 4000 system
does not allow publishing two streams to the same publish point to avoid overwriting
the first stream by the second one.
To create a VRR for use with an external server:
Go to VRR > VRRs.
1
2 In the ACTIONS list, click Add.
3 Click General Properties tab to configure the following setting:
Description
Specify the name of the Wowza server
application to be used for the VoD.
It should be consistent with the Wowza server
configuration. In this example, application name
is vod.
Description
Specify the IP address of the Wowza server.
Specify the port assigned to the Wowza server's
FTP server. The default port is 21.
Specify your user name to access this FTP server.
Specify your password to access this FTP server.
Specify the default FTP directory to save your
recordings. Use / to represent the root directory.
Specify whether to enable SSL encryption for the
communication between the Polycom RSS 4000
system and the FTP server.
Polycom, Inc.