Viewing Archives Using The Tv User Interface - Polycom RSS 4000 User Manual

Viewing Archives Using the TV User Interface

Viewing Archives Using the TV User Interface
Polycom, Inc.
To set PIN code:
On the Recording page, select Set PIN Code and then press the right
1
arrow button to confirm the operation.
On the PIN code setting page, enter the PIN code (consisting up to 16
2
digits) through the number keypad on the remote control.
3 Press "#" to confirm the operation, or press the left arrow button to exit
the set-up and return to the Recording page.
To start recording:
>> On the Recording page, select Start and press the right arrow button to
confirm the operation.
A blinking indicates that the recording is in progress.
• During recording, you can press the left arrow button to watch the endpoint
loopback video that is being recorded, or press the right arrow button to close the
loopback video and switch back to the menu page.
• If the video is being played through live streaming, the Pause function cannot be
used.
The user can view not only the files recorded by the currently dialed-in VRR,
but also all video files recorded and saved into the current Polycom RSS 4000
system.
If the bandwidth at which a user endpoint connected with the Polycom RSS 4000
system is lower than the bandwidth for certain recorded files, such files would not
display on that endpoint's screen.
Participants in a multipoint recording cannot view archives through the TV user
interface.
To view the videos recorded by current VRR:
Select View VRR Archives and press the right arrow button.
1
Select a file and press the right arrow button.
2
You can use the up/down arrow buttons to select the file, and press Zoom
out/Zoom in to turn page.
When you highlight a file, its related information, such as record time,
duration and VRR used appears on screen.
Using the RSS 4000 TV User Interface
103