Polycom RSS 4000 System User Guide
12
To start a recording from the Admin UI (only for administrators):
In the Internet Explorer's address line, enter the system's IP address in
1
this format:
https://<system IP
Enter the user name and password to log in to the system.
2
3
Go to Admin > Dashboard. In the Signaling Connections area, click Dial
out to record.
Configure the following settings:
4
Parameter
Description
Signal
Set the H.323 or SIP network type for the system to place a call.
Your choice depends on the call type used by the peer device.
Address Type
Specify the address type used to call.
Address
Specify the calling address.
The system supports entering the calling address with an
extended service number in the address box.
If you call a Polycom RMX system, you can dial into the
conference held on the RMX system by entering the numbers in
the following formats:
•
•
•
VRR Name
Click Select to select a virtual recording room (VRR). You can
use the built-in default VRR, or one you have created.
A VRR defines recording policies. For more information, refer
to
5
Click OK.
6
When the connection between the Polycom RSS 4000 system and the
endpoint is established, you can click
address>/rss.
[RMX E.164 prefix][room number] - Use when every
system has registered to a gatekeeper.
For example, if the RMX prefix is 925 and the room
number is 1001, dial 9251001.
Note: If the conference requires a password, you can dial
[RMX E.164 prefix][room number]##[password].
[room number]@ [RMX IP address] - Use when every
system has enabled SIP.
For example, if the room number is 1001 and RMX IP
address is 172.22.30.40, dial 1001@172.22.30.40.
[RMX IP address]##[room number] - Use when a system
has not been registered to a gatekeeper.
For example, if the RMX IP address is 172.22.30.40 and the
room number is 1001, dial 172.22.30.40##1001.
Note: If the conference requires a password, you can dial
[RMX IP address]##[room number]##[password].
Virtual Recording Room (VRR)
Starting a Recording
on page 65.
to start recording.
Polycom, Inc.
Need help?
Do you have a question about the RSS 4000 and is the answer not in the manual?
Questions and answers