System Configuration; Ip Settings; System Time - Polycom RSS 4000 User Manual

Polycom RSS 4000 System User Guide

System Configuration

IP Settings

System Time

22
• For live streaming, it detects whether the following parameters are available:
external server's IP address and port, application name and publishing point name,
user name and password.
• For Video on Demand, it detects whether the following parameters are available: IP
address and port, Wowza Media Server's application name, and MS server's
publishing point.
The Polycom RSS 4000 system supports both IPv4 and IPv6 network
communications. You can configure parameters to be used for network
communication, including system IP address, DNS server, NAT server and
speed/duplex modes for LAN ports.
The Polycom RSS 4000 system supports IPv6 system management, IPv6 H.323
recording and streaming, it doesn't support IPv6 SIP recording.
For more information, refer to
You can synchronize the system time with your computer, or with a network
time server.
To set the system time:
Go to System Config > System Time.
1
Configure the following settings:
2
Parameter
The time service
System Initial Configuration
Description
Specify how to set the system time:
• The Console: Synchronize the system time with your
computer.
• The NTP Server: Obtain the system time from a time
server.
System Configuration
on page 5.
Polycom, Inc.