Removing A Certificate; Using Ocsp To Obtain Revocation Status - Polycom RSS 4000 User Manual

System Configuration
Polycom, Inc.
Parameter
Certificate Info
Issued To
Issued By
Validity
Fingerprints
When a certificate is about to expire, you are notified ten days prior to the expiration
date.

Removing a Certificate

You can remove installed certificates.
A certificate cannot be removed when it is the only private certificate which can be used
as web service certificate in the system.
To remove a certificate:
Go to System Config > Certificate Management.
1
Highlight the certificate you want to remove.
2
3 In the ACTIONS list, click Delete Certificate.

Using OCSP to Obtain Revocation Status

You can enable OCSP (Online Certificate Status Protocol) to obtain the
revocation status of a certificate presented to the system.
If the certificate includes an AIA extension, the system has the information
needed to configure OCSP for obtaining revocation status. If the certificate
does not include an AIA extension, you must specify the OCSP server URL
and the certificate to verify OCSP response message.
You can override the OCSP information contained in the AIA extension of a certificate
by specifying the OSCP responder URL.
Description
States the purpose and alias of the certificate.
States the entity to which the certificate was issued and the
certificate serial number.
States the issuer.
States the issue and expiration dates.
States SHA1 and MD5 fingerprints (checksums) for
confirming certificate.
Using the RSS 4000 Admin UI
29