Client Certification; Qos - Polycom RSS 4000 User Manual

Polycom RSS 4000 System User Guide

Client Certification

QoS

30
The OCSP URL field is configurable only in maximum security mode.
To configure OCSP:
1 Go to System Config > Certificate Management.
2 Select Enable OCSP.
Click Store OCSP configuration.
3
If client certificate validation is enabled in the system, other systems can
connect to the Polycom RSS 4000 system only if they present a client certificate
issued by a CA that the system trusts.
Enable the client certificate validation only in one of the following situations:
• Your network has implemented a complete PKI (Public Key
Infrastructure) system, including a CA server, client software, and the
appropriate operational procedures. Client hardware, tokens, and
smartcards are optional.
• The CA's public certificate is installed in the Polycom RSS 4000 system so
that it trusts the CA.
• All authorized users' systems, including yours, have a client certificate
signed by the CA that authenticates them to the Polycom RSS 4000 system.
To enable the client certificate validation:
Go to System Config > Client Certificate.
1
Select Enable web client certificate validation.
2
3 Click Update. The system restarts to apply your changes.
QoS (Quality of Service) is very important in transmission of high-bandwidth
audio and video data. You can use QoS to test and guarantee the following
settings:
• Average packet delay
• Delay variation (jitter)
• Error rate
To specify QoS parameters:
1 Go to System Config > QoS.
System Configuration
Polycom, Inc.