Data Backup/Restore; Ftp Server Configuration - Polycom RSS 4000 User Manual

Polycom RSS 4000 System User Guide

Data Backup/Restore

48
The Polycom RSS 4000 system is able to backup user data to the FTP server in
the network, and restore system user data to the selected time point (based on
the time points generated in the backup). You can choose to back up the entire
user data or backup archives separately.
• To back up media files of format WMV, MP4, MP3, ISMV and ZIP (not including
RAW), you can perform a media backup. For more information, see
on page 50.
• To back up the system database, media files of all formats (RAW, WMV, MP4, MP3,
ISMV and ZIP), you need to perform an image backup. For more information, see
Backing up Image Data
• To back up system configurations, see
page 47.

FTP Server Configuration

Before backing up user data, you need to configure FTP server on the Polycom
RSS 4000 system first.
The Polycom RSS 4000 system supports the following FTP servers:
• 3CDaemon
• FileZilla Server
• Serv-U
• Microsoft FTP7.x For IIS7.x
• vsftpd
You can also configure FTP servers and transfer meeting recordings to these servers
for Video on Demand service. For more information, see
To configure an FTP server for backup:
Go to Admin > Data Backup/Restore.
1
2 Select Enable Data Backup/Restore.
3 Configure the following settings:
Parameter
Server Address
on page 49.
System Configuration Backup/Restore
Description
Enter the IP address and port of the FTP server.
System Administration
Media Backup
on
External Servers on page 76.
Polycom, Inc.