Network Settings - Polycom RSS 4000 User Manual

Command Introduction
Polycom, Inc.
[Example] Send the host whose IP address is 172.21.100.111 a Ping packet with
the size of 1500 bytes for five times cyclically. The wait time is 1000 ms:

Network Settings

Enter the following commands after the prompt # to set network
configurations:
set {lan1 | lan2} ip {dhcp | static <ip > netmask <mask > gw <gateway > } - set the
IP address for LAN 1 or LAN 2.
set {lan1 | lan2} speed {auto | 1000 | 100 full | 100 half | 10 full | 10 half} - set the
connection features for the LAN 1 or LAN2 interface.
Parameter Description
dhcp Automatically gets the address information through the DHCP
server.
static Specifies the static IP address information -
Ip: IP address of the network port
mask: subnet mask of the network port
gateway: gateway address of the network port
Parameter Description
auto Auto negotiation mode
1000 1000Mbps
100 full 100Mbps full duplex
100 half 100Mbps half duplex
10 full 10Mbps full duplex
10 half 10Mbps half duplex
Appendix B – Telnet and Terminal Commands
121