Getting The Product Activation Key; Getting The Vmc 1000 License File - Polycom VMC 1000 Getting Started Manual

Polycom, Inc.
• Activate the VMC 1000 appliance.
• Upload the VMC 1000 license file.
• Set alerts for CPU, disk, and memory usage
• Reboot the VMC 1000 appliance.
• Log into VMC 1000 Administrator UI.
• Set the VMC 1000 Site URL
The following sections explain how to do these activities.

Getting the Product Activation Key

Before you can configure the VMC 1000 appliance, you must register it and
obtain a Product Activation Key.
To get the Product Activation Key:
From the PC, access the Polycom Support page by entering the URL
1
www.polycom.com/support in a web browser.
In the Resource Center section, click the Register Your Product link.
2
If required, select New User Account or enter your User ID and
3
Password.
Click Sign In.
4
Follow the on-screen instructions for product registration and product
5
activation.
The serial number for the VMC 1000 is located on a sticker on the bottom
of the appliance.
Write down the Product Activation Key for later use.
6

Getting the VMC 1000 License File

The VMC 1000 license file enables the VMC 1000 to operate. Your VMC 1000
ships with a temporary license file that expires within 180 days. If you let the
temporary license file expire without using it, you can only use the permanent
license file to operate the VMC 1000.
To obtain a permanent license file, with no expiration date, use the following
procedure.
Installing the VMC 1000 Appliance on Your Network
5