Vertical WAVE IP 2500 Installation Manual page 97

5VCVWU
If this pattern stays on for longer than 2
seconds, transfer of control to Linux did
not occur.
If this pattern stays on for longer than 5
seconds, Linux failed to decompress
itself.
First time MAC/Serial Number
programming.
Invalid MAC/Serial Number found.
5JWVFQYP UGSWGPEG
While in normal firmware operation mode, you will observe the following status LED settings
after initiating a system shutdown/power off by pressing and holding the red button on the front
of the ISC1 for 2-3 seconds.
5VCVWU
Normal firmware operation.
Shutdown button press detected. System
shutdown initiated.
.'&
Red
Red
Red
Red
.'&
Green
Green
For Review Only - Draft Document 09/07/07
COMPANY CONFIDENTIAL - DO NOT Distribute
Wave IP 2500 Installation Guide
.'& .'&
Green Green
Green Green
Green off
Green off
.'& .'&
Blinking red / Blinking green
solid green
Blinking red / Blinking green
solid green / blinking red
.'&
off
Green
Green
Red
.'&
Blinking green
Blinking green
$