Vertical WAVE IP 2500 Installation Manual page 102

Wave IP 2500 Installation Guide
&
Name
TVSTATION
SUPPRESS_MSGS
Use the following 4 parameters to specify the complete path to the location where a
workstation application will be installed, for example:
TVCLIENTFOLDER=
If not specified, the application will be installed in the default location.
TVCLIENTFOLDER
TVTSPFOLDER
TVCMAFOLDER
Optionally, use the following 4 parameters if you are installing the single-line TAPI Service
Provider
( ADD_LOCAL= TSP or
the unattended install, you must run the TAPI Configuration Wizard later to configure TAPI SP
for the user at this PC. See "Configuring the TAPI Service Provider" on page 6-8 for more
information
For Review Only - Draft Document 09/07/07
COMPANY CONFIDENTIAL - DO NOT Distribute
Value
String Station ID of the phone that will be used by the
person at this PC:
TVSTATION=
If you do not know the station ID, pick up the phone
and dial *0.
If there is not a Wave phone near this PC, enter a
station ID of 0.
TVSTATION=
Integer 0 = (Default) Workstation Setup displays message
boxes on the PC where the applications are
installed. Workstation Setup stops processing and
waits until someone responds to each message
box.
1 = Suppress display of message boxes. The
messages are still written to the Workstation Setup
Log (see "Performing a typical unattended
installation" on page D-1.)
/"C:\Program Files\TV Client/"
String Location where ViewPoint will be installed.
String Location where the single-line TAPI Service
Provider will be installed.
String Location where the Contact Manager Assistant will
be installed.
ADD_LOCAL= ALL.) If you do not provide this information during
Description
186
0