Vertical WAVE IP 2500 Installation Manual page 58

Wave IP 2500 Installation Guide
•
•
#FFKPI CPF EQPHKIWTKPI VJG 9CXG +2  QP [QWT .#0
1.
6Q EJCPIG VJG +2 PGVYQTM UGVVKPIU QP VJG 9CXG +2 
2.

Adding the Wave IP 2500 to your Windows domain. You should add the Wave IP 2500
to your domain if you are using one, so that users can install or upgrade the ViewPoint
workstation application without needing to enter network credentials, a very error-prone
task. (For more about installing workstation applications, see page 6-4.)
Caution:
Adding the Wave IP 2500 to your company's Windows domain makes it
subject to the policies and domain settings established by your IT department. For
example, the Wave IP 2500 may start to download Microsoft updates automatically. Be
aware that these policies and settings may affect, interfere, or hinder system operation.
Changing the default name of the Wave IP 2500. By default, each Wave IP 2500 is
named "default". If more than one Wave IP 2500 is on the same network segment, each
should have a unique name to avoid problems.
From the administrator PC, log on to the Global Administrator Management Console on
the Wave IP 2500 using your Wave user name and password.
Caution:
Be sure to make all IP network setting changes outside of business hours to
avoid momentary interruptions to digital signaling (for example, key presses or LCD
updates to digital phones) while the new settings are applied.
You should make all IP network setting changes for the ISC1, VAM, and MRM at the
same time.
Select IP Network Settings in the Data Administration section.
For Review Only - Draft Document 09/07/07
COMPANY CONFIDENTIAL - DO NOT Distribute