Vertical WAVE IP 2500 Installation Manual page 26

Wave IP 2500 Installation Guide
6JG 9CXG +2  DCUG WPKV
The Wave IP 2500 base unit consists of the following:
•
•
#DQWV VJG +5%
The ISC1 includes the following:
•
•
•
•
•
•
•
•
•
•
•
•

A 19-inch rack-mountable chassis that includes room for expansion.
The Wave Integrated Services Card (ISC1), an embedded processor that provides primary
system control including voice processing and packet switching elements.
6 SIP Gateway ports
4 analog FXO trunk ports
4 analog FXS station ports
2 10/100 Mbps Ethernet ports (see "About the Ethernet ports on the Wave IP 2500" on
page 3-9 for important information about using these ports.)
2 partial-width slots that can accommodate 2 expansion modules
2 full-width universal slots that can accommodate 2 expansion cards or modules
1 USB device port
1 USB host port
RJ-21X connector (with embedded FXS and FXO ports)
Audio port for an external music-on-hold source
1 port for an external paging system
V.34 Fax modem
For Review Only - Draft Document 09/07/07
COMPANY CONFIDENTIAL - DO NOT Distribute