Vertical WAVE IP 2500 Installation Manual page 47
Hide thumbs
Also See for WAVE IP 2500:
- Hardware reference manual (210 pages) ,
- Installation manual (236 pages)
Table of Contents
Advertisement
Chapter 4
+PKVKCN %QPHKIWTCVKQP
The Vertical Wave IP 2500 is delivered with all hardware and software components installed.
This chapter describes the following tasks that you must perform to initially configure the
Vertical Wave IP 2500:
1.
Obtaining all required HotFixes. See page 4-2.
2.
Configuring the administrator PC. See page 4-2.
3.
Connecting to the Vertical Wave IP 2500 via your LAN or a modem. See page 4-4.
4.
Applying all required HotFixes. See page 4-9.
5.
Adding the Wave IP 2500 to your LAN. See page 4-11.
This chapter also explains how to perform the following tasks:
•
Power-cycling the Wave IP 2500. See page page 4-15.
•
Resetting the Wave IP 2500 IP addresses to the factory defaults. See page 4-16.
•
Using the Service Account Utility any time that you change the default Wave
domain name, account name, or account password. See page 4-17.
9JGTG VQ IQ PGZV
After you complete the tasks described in this chapter, go to Chapter 5, "Entering and
Activating Wave Licenses."
For Review Only - Draft Document 09/07/07
COMPANY CONFIDENTIAL - DO NOT Distribute
Wave IP 2500 Installation Guide
Advertisement
Table of Contents
