Vertical WAVE IP 2500 Installation Manual page 54

Wave IP 2500 Installation Guide
%QPPGEVKPI VQ VJG 9CXG +2  XKC C OQFGO EQPPGEVKQP
Important:
manufacturer's documentation.
Note:
Windows XP. The steps may be different on a PC running another Windows operating system.
6Q EQPHKIWTG VJG ENKGPV OQFGO QP VJG CFOKPKUVTCVQT 2%
1.
2.
3.
4.
5.
6.
7.
8.

Before proceeding, install the modem on the administrator PC according to the
The following procedures describe the steps to perform on an administrator PC running
On the administrator PC, select Start > Control Panel > Network Connections > Create a
new connection. When the New Connection Wizard starts, click Next to continue.
In the Network Connection Type screen, select Connect to the network at my workplace,
and then click Next.
In the Network Connection screen, select Dial-up connection and then click Next.
In the Connection Name screen, enter a name for the connection, for example, Wave
Modem Connection. Click Next to continue.
If you have another device (besides the client modem) connected to the administrator PC,
in the Select a Device screen, select the checkbox for the modem that you added. Click
Next to continue.
In the Phone Number to Dial screen, enter the Phone number:
• For a remote connection, enter the 7 or 10 digit phone number that will ring the
desired trunk.
• For a local connection, enter the extension number for the Wave modem (the default
is 570).
Click Next to continue.
In the Connection Availability screen, specify whether this connection will be available
to all users or just to yourself. Choose Anyone's use or My use only, depending on your
security requirements. Click Next to continue.
In the final screen, click Finish. The Connect dialog box opens automatically after a few
moments. Go to the next section.
For Review Only - Draft Document 09/07/07
COMPANY CONFIDENTIAL - DO NOT Distribute