Vertical WAVE IP 2500 Installation Manual page 42

Wave IP 2500 Installation Guide
%QPPGEVKPI VJG CPCNQI WPKXGTUCN OQFWNG
The analog universal module provides the following:
•
•
The analog universal module is a partial-width module that can be installed in any module slot
or in any universal slot via a module carrier.
See Appendix A, "Trunk and Station Ports and Pinouts" for RJ-21X interface port descriptions
and pinout pairs for the analog universal module.
6Q EQPPGEV VJG CPCNQI WPKXGTUCN OQFWNG
1.
2.
%QPPGEVKPI VJG FKIKVCN UVCVKQP OQFWNG
The digital station module provides 12 digital station ports. It is a partial-width module that can
be installed in any module slot or in any universal slot via a module carrier.
See Appendix A, "Trunk and Station Ports and Pinouts" for RJ-21X interface port descriptions
and pinout pairs for the digital station module.
6Q EQPPGEV VJG FKIKVCN UVCVKQP OQFWNG
1.
2.

8 analog FXO trunk ports, supporting loop start, ground start, and analog DID trunks
(analog DID trunks support inbound calling only).
8 analog FXS station ports.
Locate the RJ-21X port on the module.
Connect the analog station/trunk cable to the RJ-21X port.
Locate the RJ-21X port on the module.
Connect the RJ-21X cable from your punchdown block or multiport adapter to the port.
For Review Only - Draft Document 09/07/07
COMPANY CONFIDENTIAL - DO NOT Distribute