Vertical WAVE IP 2500 Installation Manual page 65

Chapter 5
'PVGTKPI CPF #EVKXCVKPI 9CXG .KEGPUGU
This chapter explains how to do the following:
• Enter Wave licenses via the Global Administrator Management Console.
• Activate your Wave licenses to enable full functionality on your Wave system.
• View the status of your Wave licenses.
Caution:
It is strongly recommended that you enter all of your Wave licenses and activate
them immediately after installing your Wave IP 2500 as described in this manual. Doing so
avoids the disruptions described in "Before your licenses are activated" on page 5-6.
Important:
Be sure to use the version of Java that came with your Wave IP 2500—do not
upgrade to a newer version that you obtain elsewhere. Failure to use the correct version of Java
may result in the inability to import and/or activate licenses and other errors.
9JGTG VQ IQ PGZV
After you complete the tasks described in this chapter, your Wave IP 2500 is fully operational.
You are now ready to configure your phone system by performing the following tasks. For more
information, see the Wave Global Administrator Guide.
• Connect and configure trunks and stations.
• Add and configure users, auto attendants, inbound and outbound call routing, your dial
plan, voice mail, and so forth.
Optionally, install ViewPoint and other Wave workstation applications on PCs in your network
as described in Chapter 6 in this manual.
For Review Only - Draft Document 09/07/07
COMPANY CONFIDENTIAL - DO NOT Distribute
Wave IP 2500 Installation Guide