Chapter 3
5GVVKPI 7R VJG 8GTVKECN 9CXG +2
Setting up the Wave IP 2500 includes the following tasks. Each step is described in detail later
in this chapter.
•
•
•
•
•
•
•
•
•
9JGTG VQ IQ PGZV
After you complete the tasks described in this chapter, go to Chapter 4, "Initial Configuration."
#DQWV VJG 9CXG +2
The Wave IP 2500 consists of the following components. Each is described in the following
sections.
•
•
Mounting the Wave IP 2500 (see page 3-4).
Grounding the Wave IP 2500 (see page 3-8).
Connecting the Wave IP 2500 to your LAN (see page 3-9).
Connecting the Wave IP 2500 to power and powering on (see page 3-10).
Connecting to trunk and station ports on the ISC1 (see page 3-11).
Installing expansion components, including Expansion Units (EXUs), Media Resource
Modules (MRMs), and all other expansion cards and modules. See page 3-12.
Connecting modules and cards (see page 3-16).
Connecting a music-on-hold (MOH) system (see page 3-20).
Connecting a paging system (see page 3-21).
Wave IP 2500 base unit.
Expansion options, including:
•
EXUs
•
MRMs
•
Expansion cards and modules
For Review Only - Draft Document 09/07/07
COMPANY CONFIDENTIAL - DO NOT Distribute