Vertical WAVE IP 2500 Installation Manual page 85

4.
5.
6.
%CNNKPI HTQO CPQVJGT CRRNKECVKQP
After installing the TAPI Service Provider, users can call contacts by using the instructions
provided with their contact managers. Calls appear in their Call Logs as if they had dialed them
from ViewPoint or the phone.
%QPHKIWTKPI VJG 9CXG %QPVCEV /CPCIGT #UUKUVCPV
1.
2.
3.
5[PEJTQPK\KPI U[UVGO ENQEMU
It is recommended that you make sure that the system clocks on the Wave IP 2500 and user PCs
are synchronized. This ensures that message time stamps, which are set by the Wave IP 2500's
clock, agree with the time displayed on the user PCs.
In Microsoft domain-based networks, you can synchronize the workstation clock with the Wave
IP 2500's clock by including the following statement in the logon script that executes when the
workstation connects to the domain controller:
Under Modem or Line, verify that "Wave Line 1" is selected. This option is available
after the TAPI Service Provider is installed.
To receive screen pops with contact information when a contact calls, select the Lookup
contact using caller ID checkbox. Deselect the checkbox if you do not want to receive
screen pops.
Click OK.
If the Contact Manager Assistant is not running, start it by clicking
Start > Programs > Vertical Wave > Wave Contact Manager Assistant.
If only the Contact Manager Assistant splash screen appears, right-click the Outlook,
GoldMine, GoldMine FrontOffice, or GoldMine Business Contact Manager icon on the
system tray at the lower right of your screen. Select Setup.
Click Help for detailed instructions.
net time \\<Wave IP 2500 Name> /set /yes
For Review Only - Draft Document 09/07/07
COMPANY CONFIDENTIAL - DO NOT Distribute
Wave IP 2500 Installation Guide