Vertical WAVE IP 2500 Installation Manual page 23

5CHGV[ 4GSWKTGOGPVU
Refer to the following cautionary procedures to help ensure your safety and avoid damaging the
Wave IP 2500:
•
•
•
2TQVGEVKXG )TQWPFKPI
Caution:
do the following.
•
•
'NGEVTKECN 5CHGV[
•
•
Protective Grounding
Electrical Safety
Proper Lifting
For your safety and to avoid damaging sensitive electronic components, be sure to
Ground the Wave IP 2500 chassis according to the instructions in "Grounding the Wave
IP 2500" on page 3-8.
To prevent electrostatic discharge:
• Always work at a static-safe area that includes an anti-static mat and an antistatic
wrist strap that has been adhered it to a grounded surface, such as a mounting rack
or the Wave IP 2500 face plate.
• Keep electronic components inside static-safe packaging until you are ready to use
them.
• Unpack electronic components in a static-free area.
• Store spare parts in the original static-safe packaging or in static-safe containers.
Power off the Wave IP 2500 and disconnect the power cable whenever you remove,
replace, or install hardware components.
Never touch bare conductors or wires on telephony ports or other interfaces.
For Review Only - Draft Document 09/07/07
COMPANY CONFIDENTIAL - DO NOT Distribute
Wave IP 2500 Installation Guide