Vertical WAVE IP 2500 Installation Manual page 107

9JGP WRFCVGF 9KPFQYU (KTGYCNN GZEGRVKQPU CTG CRRNKGF
The changes you made according to the steps in the previous section will be picked up by
workstation PCs the next time that each application starts and connects to the Wave IP 2500.
If you make changes to the Security \ Workstation Firewall tab while one or more Wave
workstation applications are in an active session, the new settings will not be applied until the
applications are restarted.
•
•
9KPFQYU (KTGYCNN GZEGRVKQPU CFFGF HQT 9CXG
The following Windows Firewall exceptions are added to Wave workstation PCs using the
settings you specified in the Security \ Workstation Firewall tabs, according to the instructions
in the previous section. All of these exceptions are required to run Wave across a network.
•
•
•
•
Restarting the Wave IP 2500 forces all workstation applications except the TAPI Service
Provider to restart.
To restart the TAPI Service Provider, restart the PC where that application is running.
DCOM Resolver: Port TCP135.
Wave ViewPoint: Vertical.Wave.ViewPoint.exe.
Wave Contact Center Reporter: TVReporter.exe.
Wave Voicemail Archive Browser: TVRecordingBrowser.exe.
For Review Only - Draft Document 09/07/07
COMPANY CONFIDENTIAL - DO NOT Distribute
Wave IP 2500 Installation Guide
'