5.
Position the mounting brackets at the bottom of each of the chassis side panels. Use a #2
Phillips screwdriver to fasten each mounting bracket to the chassis with the screws
provided.
6.
With another person's assistance, lift the Wave IP 2500 chassis and place it against the
wall-mounted plywood so that the side of the chassis with the fans faces to the left. Line
up the left side of the chassis with the vertical line that you drew on the plywood, and line
up the top of the chassis with the horizontal line that you drew.
7.
Insert and tighten two self-threading #10 screws through each mounting bracket to
securely attach the chassis to the plywood. When successfully wall-mounted, the Wave
IP 2500 chassis looks like this:
For Review Only - Draft Document 09/07/07
COMPANY CONFIDENTIAL - DO NOT Distribute
Wave IP 2500 Installation Guide