Vertical WAVE IP 2500 Installation Manual page 96

Wave IP 2500 Installation Guide
5VCVWU
Firmware waiting for iCom connection.
Initial connection established. Waiting
for iCom heartbeat handshake.
Normal firmware operation.
$QQV HCKNWTG KPFKECVQTU
The following status LED settings indicate possible boot failures. Contact your technical
support representative for more information.
5VCVWU
Early boot failure likely due to some
kind of hardware failure, except for the
following color combination which
indicates that early boot completed
successfully:
off-Green-Green-Green
Invalid Flash configuration detected.
Flash checksum failure while waiting
for PLD Programmer.
PLD Programming failure.
Bad Flash image configured.
Too many failed Flash attempts.
User connected to Redboot and aborted
booting to Linux for maintenance.
$
.'&
Green
Green
Green
.'&
off
Red
Red
Red
Red
Red
Red
For Review Only - Draft Document 09/07/07
COMPANY CONFIDENTIAL - DO NOT Distribute
.'& .'&
Blinking red / Blinking red
blinking green
Blinking red / Blinking green
blinking green
Blinking red / Blinking green
solid green
.'& .'&
Any color Any color
Red Green
off Red
off Red
off Green
off Red
Red Green
.'&
Blinking red
Red
Blinking green
.'&
Any color
Red
off
Red
Red
Green
off