Vertical WAVE IP 2500 Installation Manual page 55

6Q EQPPGEV VQ VJG 9CXG +2  XKC C NQECN OQFGO EQPPGEVKQP
1.
2.
3.
#RRN[KPI CNN TGSWKTGF *QV(KZGU
This section describes how to use the Software Upgrade applet to apply one or more HotFixes
to upgrade the Wave IP 2500. The Software Upgrade automatically restarts the Wave IP 2500
as required by the HotFixes that you apply.
Important:
configuration steps described in this chapter.
Select Start > Settings > Network Connections and then click the new connection (for
example, Wave Modem Connection).
In the Connect dialog box, enter the following information, and then click Connect.
• User name: GlobalAdministrator
• Password: Vertical4VoIP!
Password is case-sensitive.
Note:
Once you have established the connection, you can do the following:
• To start the Global Administrator Management Console on the Wave IP 2500 via
the modem connection, point your browser to 192.168.210.1, the IP address of the
Wave modem.
Important:
You can perform all Management Console tasks via the modem
connection, but be aware that HotFix upgrades will be very slow, typically taking
several hours to complete, and software upgrades will take even longer. HotFix or
software upgrades will run much faster if you connect to the Wave IP 2500 via your
network, as desribed on page 4-4.
• To establish a Remote Desktop session on the Wave IP 2500 via the modem
connection, start Remote Desktop and then enter 192.168.210.1 (the IP address of
the Wave modem) in the Computer field.
Go to the next section.
You must apply all required HotFixes before performing any subsequent
For Review Only - Draft Document 09/07/07
COMPANY CONFIDENTIAL - DO NOT Distribute
Wave IP 2500 Installation Guide