Vertical WAVE IP 2500 Installation Manual page 100

Wave IP 2500 Installation Guide
2GTHQTOKPI C EWUVQO WPCVVGPFGF KPUVCNNCVKQP
To perform a custom unattended workstation application installation, run the following
command on the PC where the workstation applications will be installed, including any of the
parameters described in the table on page D-3.
This example only shows the parameters required for any custom unattended installation. For
other examples of custom installation commands, see the next section.
Note that any string value that contains a space must be delimited with the characters /" before
and after the string value, as in the following example:
%WUVQO WPCVVGPFGF KPUVCNNCVKQP GZCORNGU
The following examples demonstrate different unattended installations. See "Workstation Setup
command parameters" on page D-3 for details on the command parameters you can use.
The following command installs ViewPoint in the default location:
The following command installs all of the workstation applications in the default location:
The following command does the following:
&
\\<Wave Servername>\Netsetup\setup.exe /s /v"/qn CUSTOM_INSTALL=1
INSTALLLEVEL=200 /l*v %TEMP%\wssetup.log"
TVCMAFOLDER=/"C:\Program Files\CMA/"
setup.exe /s /v"/qn CUSTOM_INSTALL=1 INSTALLLEVEL=200
ADDLOCAL=Client"
setup.exe /s /v"/qn CUSTOM_INSTALL=1 INSTALLLEVEL=200
ADDLOCAL=ALL"
• Installs the single-line TAPI Service Provider in the default location.
• Installs the Contact Manager Assistant in the specified location.
• Configures the single-line TAPI Service Provider.
• Launches the Contact Manager Assistant when the installation completes, if a
restart is not required.
setup.exe /s /v"/qn CUSTOM_INSTALL=1 INSTALLLEVEL=200
ADDLOCAL=TSP,CMA TVSERVER=TeleVantage TVSTATION=1
TVUSER=Operator TVPASSWORD=0 TVTSPAPPHANGUP=1 TVTSPTRACE=1
TVCMAFOLDER=/"C:\Program Files\CMA/" TVLAUNCHCMA=1 /l*v
%TEMP%\wssetup.log"
For Review Only - Draft Document 09/07/07
COMPANY CONFIDENTIAL - DO NOT Distribute