Vertical WAVE IP 2500 Installation Manual page 29

3. Tighten the screws, and then insert and tighten a second rack mounting screw in each
bracket. When successfully rack-mounted, the Wave IP 2500 chassis looks like this:
9CNN OQWPVKPI VJG 9CXG +2 
You can mount the Wave IP 2500 chassis onto a wall by first attaching a piece of prepared
plywood to studs in the wall, then attaching the chassis to the plywood.
Note: You can only wall mount the Wave IP 2500 chassis itself —wall mounting is not an
option if you are using one or more EXUs.
Caution:
Note the following:
• Do not attach the chassis directly to a wall without using the plywood as a support—the
plywood must be firmly attached to wall studs in order to support the weight of the
chassis.
• Do not wall mount the chassis with the cards in a horizontal position. Only wall mount
the chassis with the cards in a vertical position, as in the picture on page 3-7.
For Review Only - Draft Document 09/07/07
COMPANY CONFIDENTIAL - DO NOT Distribute
Wave IP 2500 Installation Guide