Vertical WAVE IP 2500 Installation Manual page 104

Wave IP 2500 Installation Guide
8GTKH[KPI VJCV CP WPCVVGPFGF KPUVCNNCVKQP YCU UWEEGUUHWN
You can determine if a unattended installation was successful by viewing the Workstation Setup
Log. This file is created in the
When an installation is successful, an entry like this one appears near the end of the file:
Note:
completed successfully.
&
Name
TERMINALSVRMODE
Use the following 3 parameters to launch a workstation application after the installation
completes.
Note: Each parameter takes effect only if the application was installed successfully and no
restart is necessary. These parameters are not affected by the REBOOT parameter setting.
TVLAUNCHCLIENT
TVLAUNCHCMA
REBOOT
MSI (c) (80:34): Product: workstation applications -- Installation operation completed
successfully.
You can also examine the Windows Event Log on the PC to see if the installation
For Review Only - Draft Document 09/07/07
COMPANY CONFIDENTIAL - DO NOT Distribute
Value
Integer 1 = Individual user logon settings are preserved for
users who access workstation applications via
Terminal Services.
0 = (Default) Mode used for non-Terminal Services
installations.
Integer 0 = (Default) Do not start ViewPoint after the
installation completes.
1 = Start ViewPoint after the installation completes.
Integer 0 = (Default) Do not start the Contact Manager
Assistant after the installation completes.
1 = Start the Contact Manager Assistant after the
installation completes.
String Force = (Default) Automatically restarts the PC
where the workstation applications are installed
after the installation completes.
ReallySuppress = Do not restart the PC after
installation completes. If you specify
REBOOT=
restarted later.
directory on the PC where Workstation Setup was run.
\Temp
Description
ReallySuppress, the PC must be